UTS
英
美
abbr. 抗张强度极限；拉力强度（极限）(Ultimate Tensile Strength); 水下电话系统(Underwater Telephone System); 统一传输系统(Unified Transfer System)
双语例句
- In addition, the mechanical properties ( including the UTS value and microhardness) of the welded joints decreased compared to the welded joint without flux.
涂覆活性剂后，焊接接头的力学性能（包括极限抗拉强度和硬度）降低。 - Objective To discuss the concept of ulnar tunnel at the wrist, the types, causes, traits of compression, diagnosis, and clinical significance of ulnar tunnel syndrome ( UTS).
目的探讨腕尺管的概念，腕尺管综合征的分型、病因、卡压特点、诊断及其临床意义。 - , and YS ( yield strength) and the value of YS/ UTS increase through the followed artificial ageing with obvious loss of elongation.
而其后的人工时效处理能明显提高合金的屈服强度和屈强比，但也明显降低了延伸率。 - The results show that the addition of Y and Zn improves YTS values but decreases the UTS and elongation values of as-cast alloys.
结果表明：Y、Zn元素提高了合金的屈服强度但降低了抗拉强度和延伸率。 - The Unmanned Turret System ( UTS) is the developing direction for future fire system. The UTS is relatively secure to the crew members when the tank and armored vehicle turret is hit with a high probability.
无人炮塔系统是未来火力系统发展的方向，在坦克和装甲车辆炮塔部分被命中概率高的现实情况下，无人炮塔对乘员来说相对安全。 - Compared with peak aging alloys, the ultimate tensile strength ( UTS) of two-step aging alloys reduced by about 13%, but UTS of regression-reaging treated alloys excelled that of peak aging alloys.
同时发现，双级时效合金的抗拉强度比峰时效合金的强度下降了13%左右，而回归再时效合金的强度优于峰时效合金的强度。 - The improvement of YTS is attributed to the grain refinement strengthening of Y and Zn, and to the solid solution strengthening of Zn. The reduction of UTS and elongation are caused by the precipitation of a compound phase along the grain boundary.
Y、Zn元素的细晶强化及Zn元素的固溶强化是屈服强度提高的主要原因；抗拉强度和延伸率的降低是由于化合物相沿晶界析出。 - CW_PA, ceramometal alloy, joined by laser welding machine, was tested by the UTS, SEM and metallographic_examination. The good results show that it can be applied to the clinic.
激光焊接CWPA烤瓷合金，测试其力学性能，作金相，SEM分析，结果表明完全达到临床要求。 - The output parameters of the model are three mechanical properties namely ultimate tensile strength ( UTS), yield strength ( YS) and elongation ( ELO).
模型的输出为三个力学性能指标，即抗拉强度、屈服强度和延伸率。 - Influence of fibre length on UTS and reliability of mullite/ zl109 Composites
纤维长度对M/ZL109复合材料强度及可靠性的影响