meshing

英 [ˈmeʃɪŋ]

美 [ˈmeʃɪŋ]

v.  (使)吻合，相配，匹配，适合; 啮合
mesh的现在分词

COCA.41043

柯林斯词典

• N-VAR 网眼织物;网状物
  Meshis material like a net made from wire, thread, or plastic.
  1. The ground-floor windows are obscured by wire mesh.
     一楼的窗户装有防盗网。
  2. ...a mesh small enough to exclude tiny insects.
     网眼小得足以挡住小昆虫的网
• V-RECIP-ERG (使)相匹配;(使)相互协调;(使)吻合
  If two things or ideasmeshorare meshed, they go together well or fit together closely.
  1. Their senses of humor meshed perfectly...
     他们的幽默感配合得天衣无缝。
  2. This of course meshes with the economic philosophy of those on the right...
     这自然与右派的经济哲学相吻合。
  3. Meshing the research and marketing operations will be Mr. Furlaud's job.
     把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。

英英释义

noun

• the act of interlocking or meshing
  1. an interlocking of arms by the police held the crowd in check
  Synonym:meshinterlockinterlocking
• an open fabric of string or rope or wire woven together at regular intervals
  Synonym:netnetworkmeshmeshwork
• contact by fitting together
  1. the engagement of the clutch
  2. the meshing of gears
  Synonym:engagementmeshinterlocking

双语例句

• Meshing the research and marketing operations will be Mr. Furlaud's job.
  把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。
• Meshing Characteristic and Stress Analysis of Skew Bevel Gear with Parameterization Method
  参数化斜齿圆锥齿轮的啮合特性与应力分析研究
• After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
  在建立了球齿轮齿廓曲面方程和啮合模型基础上，利用计算机仿真的方法对其进行了齿面接触分析研究。
• Meshing parameters in harmonic gear drive are optimized in the paper. Wherefore writer carries out another iterative computation.
  一齿轮与另一齿轮啮合.文中对谐波齿轮传动的啮合参数进行了优化设计。
• Based on the theories of rotor dynamics and gear meshing, the finite element model of a gear-shaft system was established according to a certain gear transmission system of a steam unit.
  以某机组齿轮传动系统为研究对象，根据转子动力学基本理论和齿轮啮合原理，建立了某齿轮传动系统的齿轮-轴系耦合系统振动有限元模型。
• Calculation and Analysis of Meshing Impact of Double Circular Arc Gear Transmission
  双圆弧齿轮传动啮入冲击的计算与分析
• The difference between the plunge shaving and the conventional shaving is pointed out from the meshing points of view.
  分析并阐述了径向剃齿法与普通剃齿法在啮合原理上的区别；
• Based on the above principle, the model for the friction power loss of the gears meshing was built.
  据此原理，建立了齿轮啮合过程的摩擦功耗计算模型。
• Research on the Cycloid Bevel Gear Meshing Characteristic and Processing Device
  摆线锥齿啮合特性及加工装置的研究
• Gear meshing error meter fasten or join with a joggle.
  齿轮啮合误差测量仪用啮合扣固定或连接。